16GB PowerEdge M610x M-Series memory upgrades
RAM 1333MHz | ECC | Registered | 1,35V | 4 Rank

TS-873AeU / TS-873AeU-RP NAS RAM >> Certified compatibility

The 16GB RAM listed have been certified by us for your NAS system. That means we vouch for the compatibility of the memory modules. CompuRAM memory modules can act like an original component to supplement RAM already installed or to be used as a spare part.

In compliance with the Qnap guidelines on memory upgrades, it is possible to run RAM modules from different manufacturers alongside each other in the same NAS.
Please note: The figures given in the product description for criteria such as speed and timings are the minimum specifications listed by Qnap and are provided for reference purposes only. For our modules we always use the most current and fastest DRAMs. That means, that we typically provide memory modules that allow an even higher timing than neccessary for your system.

Retention of device guarantee and OEM quality for your Qnap TS-873AeU / TS-873AeU-RP

If you install a CompuRAM memory module in your TS-873AeU / TS-873AeU-RP NAS, this does not affect the manufacturer’s device guarantee; most manufacturers mention this explicitly in their guarantee conditions. Your entitlement to a guarantee will therefore remain unaffected by when the slots and ports intended for hardware expansions are used appropriately.

By the way, CompuRAM memory modules are usually made the same manufacturer (OEM) as the original memory installed by the NAS manufacturer, e.g. Qnap. The technologies that are required for the safe running of a NAS are also integrated features to our 260pin SO-DIMM DDR4 upgrades.

OEM Part-# - 2x RAM-8GDR4ECT0-SO-2666

To facilitate the identification of the appropriate upgrades, we have additionally listed for the used of Qnap designation 2x RAM-8GDR4ECT0-SO-2666 here.